Viscosity Grade AC-10 Bitumen
Viscosity Grade AC-10 Bitumen Exporter and Supplier
AC-10 Bitumen is an asphalt cement classified under the AC viscosity grading system according to viscosity and other applicable quality requirements. The AC grading system is distinct from both Penetration Grading and the Superpave Performance Grade (PG) system. AC grades are generally covered by applicable ASTM specifications, which define viscosity and related physical property requirements for pavement construction. Buyers should confirm exact compliance and test data against the applicable project specification before ordering. AC-10 is a lower-to-moderate viscosity AC grade, generally associated with a balance of workability and binder stability compared with softer and higher-numbered AC grades.
AC-10 Bitumen specifications and technical properties, including viscosity, penetration, flash point, ductility, and solubility, depend on the applicable standard, so buyers should confirm exact values through the relevant test documentation. This grade may be considered for highways, road construction, and Asphalt paving projects, including medium- to heavy-traffic pavements where its viscosity characteristics meet the project requirements. Selecting AC-10 or another asphalt cement grade requires evaluating climate, traffic loading, pavement design, and asphalt mixture requirements specific to each project rather than assuming universal suitability.
Turkey Bitumen supplies Viscosity Grade AC-10 Bitumen to international importers, asphalt plants, contractors, and procurement teams, supporting export orders around project-specific requirements and technical documentation. Buyers are welcome to contact us for specifications, technical information, and a quotation.
Buyers can also explore other AC viscosity grades according to their project requirements, including AC-2.5 Bitumen, AC-5 Bitumen, AC-20 Bitumen, AC-30 Bitumen, and AC-40 Bitumen.
Viscosity Grade AC-10 Bitumen Specifications
| Viscosity Grade AC-10 Bitumen Specifications | |||
| Properties | Units | Specifications | Test Method |
| Viscosity, 140°F (60°C) | P | 1000± 200 | ASTM D-2171 |
| Viscosity, 275°F (135°C), Min | cSt | 150 | ASTM D-2171 |
| Penetration, 77°F (25°C), 100g, 5sec, Min | 0.1 MM | 70 | ASTM D-5 |
| Flash point, Cleveland open cup, Min | °C | 219 | ASTM D-92 |
| Solubility in trichloroethylene, Min | %Wt. | 99 | ASTM D-2042 |
| Tests on residue from thin-film oven test: | |||
| – Viscosity, 140°F (60°C), Max | P | 5000 | ASTM D-2171 |
| – Ductility, 77°F (25°C), 5cm/min, Min | CM | 50 | ASTM – D113 |
Other Bitumen Products
Viscosity Grade AC-10 Bitumen Exporter and Supplier
Viscosity Grade AC-10 Bitumen is an asphalt cement classified according to viscosity related properties, commonly used in highway and road construction where a medium viscosity binder is required.
The "AC-10" designation refers to a specific viscosity grade within the asphalt cement classification system, positioned in the medium viscosity range of common AC grades.
ASTM D3381 is a technical standard that classifies asphalt cement by Viscosity Grade and defines related physical property requirements. Buyers should confirm specific compliance and test data directly with their supplier.
Penetration grading, such as 60/70, is based on a penetration test at a fixed temperature, while AC viscosity grading classifies bitumen according to its viscosity at specified test conditions.
Performance Grade (PG) bitumen is classified according to the high and low pavement temperatures it is engineered to withstand, while AC viscosity grading is based on viscosity related properties rather than pavement temperature range.
AC-10 Bitumen is often considered for highways, Road Construction, and asphalt paving projects, including medium- to heavy traffic pavements, depending on project requirements.
AC-10 may be suitable for medium to heavy traffic roads due to its dependable viscosity characteristics, though suitability depends on the specific project's climate and traffic conditions.
Key parameters generally include viscosity, penetration, flash point, ductility, and solubility. These vary by applicable standard, so buyers should confirm exact figures through the supplier's test certificate for their order.
Buyers should review applicable technical specifications, required test documentation, intended application and traffic conditions, packaging format, and shipping logistics before finalizing a purchase order.
Buyers can contact Turkey Bitumen with their required quantity, destination port, and project details to receive a quotation along with relevant technical information for Viscosity Grade AC-10 Bitumen.
